Electrical
Burned Wire Inside an Electrical Panel
Status Immediate Safety Concern
A conductor inside a service panel was hissing, burning, and melting—an immediate fire hazard that needs a licensed electrician, not a DIY patch.
View case fileTHE HOUSE FILES
Electrical Defects
Real electrical conditions photographed and explained during home inspections—what they look like, why they matter, and what a qualified electrician should evaluate.
These case files are first-hand inspection observations, not a code-compliance determination or a substitute for a licensed electrician.
Panels & breakers
Conditions documented at the service panel and circuit breakers.
Electrical
Double-Tapped Breakers: When Are Two Wires on One Breaker a Problem?
Status Plan for Correction
Two conductors on one breaker terminal need listing verification—many breakers allow only one wire.
View case file
Wiring, splices & junction boxes
Exposed conductors, uncovered boxes, and splices that belong in an enclosure.
Electrical
Uncovered Junction Box in an Attic
Status Prompt Evaluation
Open electrical junction boxes sitting in attic insulation leave splices exposed where heat and combustibles meet.
View case fileElectrical
Why Electrical Splices Must Be Inside a Junction Box
Status Prompt Evaluation
Exposed outdoor wire connectors near grade—why an enclosure rated for the location matters.
View case fileElectrical
Exposed Wiring at a Water Heater
Status Immediate Safety Concern
Open electrical covers and exposed splices on a water heater create a shock and fire risk at an always-on appliance.
View case file
Outlets & GFCI protection
Receptacle tester findings, ungrounded outlets, and outdoor GFCI failures found during inspections.
Electrical
Reversed Polarity Outlet: What the Tester Means
Status Plan for Correction
A plug-in tester reading of hot and neutral reversed—what it means, why it matters, and what a licensed electrician should correct.
View case fileElectrical
Open Ground Outlet: What It Means and Why It Matters
Status Plan for Correction
A three-prong outlet that tests as having no equipment ground—common in older homes with two-wire wiring. Here’s what it means, why it matters, and how it’s corrected.
View case fileElectrical
Exterior GFCI Outlet Not Working or Won't Reset
Status Prompt Evaluation
Outdoor GFCI protection that will not trip, shows moisture damage, or otherwise fails the safety device homeowners rely on outdoors.
View case file
Need the electrical system inspected?
These files help you recognize conditions. They cannot determine the condition of a specific property. Schedule a home inspection if you need the systems evaluated on site.